Beijing4GE+1POTS+WIFI+POE

product description:

E8007U-RP is an ONT equipment terminal in the EPON system. In cooperation with the OLT, the ONT can provide various broadband services to connected users, such as Internet, VoIP, HDTV, Video Conference and other services. It is based on the mature, stable and cost-effective EPON technology, providing a PON interface, four 1000M adaptive electrical interfaces, a VOIP telephone interface and a USB interface. Adopt single fiber wavelength division multiplexing technology (downlink 1490nm, uplink 1310nm), only need a fiber to connect to the OLT, the maximum transmission distance can reach 20 kilometers, support power failure report function, support local WEB management function, professional for hotel industry applications , Full iron case, wide temperature range products. Support power supply to camera and AP.

Product interface:

Interface: hardware interface, looking at the interface direction from left to right, the interface sequence is: RJ11 telephone interface, network port 4-network port 1, wireless switch, reset button, USB interface, DC 12V interface, power switch.

Indicator light: LED definition from left to right: power supply, optical fiber G, optical signal, broadband, telephone, network port 1-4, USB

Features:

1. HGU ONU product form, supports bridging and NAT modes;

2. 802.11b/g/n wireless access;

3. Wireless use 2T2R built-in dual antenna;

4. Provide a VOIP interface to support connection to ordinary telephones;

5. The USB interface supports configuration saving and restoration;

6. 48V/1.25A external power supply.

Key product features:

• Processor features:

l

>Support ARM processor with 800MHz frequency;

>Support 32KB I-Cache and D-Cache;

• Key features of the product:

Ø EPON

>Comply with IEEE802.3ah standard;

>Support the downlink rate is 1.244Gbit/s, and the uplink rate is 1.244Gbit/s;

>Support two-way FEC, support RS (255.239), RS (255,223) FEC codec;

>Support AES128 encryption and decryption function;

>Support SBA and DBA bandwidth allocation;

>Support synchronous Ethernet function;

>Support Dying-Gasp, support rogue onu detection;

Ø VOIP

>Support 1-channel voice processing;

>Support various prompt sound generation;

>Support G.711, G.722, G.729, T38 and other codecs;

>Support FoIP function;

>Support Fax/Modem VBD (Voice Band Data) function;

>Support echo suppression, voice activity detection, comfortable background noise, voice frame compensation and other functions;

>Support VoIP statistics and fault diagnosis functions;

>Each POTS can be individually configured with VoIP codec, codec priority order and packing interval can be configured;

>Support DTMF detection, generation, transmission and recovery functions;

>Support FSK generation, with calling number display function;

>Support two-stage dialing, support RFC2833 in-band transmission of DTMF tone;

>Support tripartite conference function;

Ø Business performance

> Two-way wire-speed forwarding of Layer 2 data services, supporting 4K MAC address tables in bridge mode;

>Support 802.3, 802.1Q Tag/Untag Ethernet frame, support QinQ;

>Support flexible tag processing, compatible with CTC2.1, TR156 requirements;

>Support flexible flow classification, up to 8K flow classification rules;

>Support special message capture;

>Support link error event monitoring and loopback monitoring;

>Support L2, L3 (IPv4/6) multicast forwarding, and support multiple forwarding methods;

>Support multicast replication function, support 3K V4 multicast groups and 768 V6 multicast groups;

>Support the replication capability of the user port;

>Support 802.1ag/Y.1731, support connectivity monitoring and performance detection;

> Three-layer data service two-way wire-speed forwarding: support IPv4, IPv6 dual stack, support DS-Lite, 6RD hardware acceleration;

>Support NAPT hardware acceleration and 8K hardware acceleration table;

>Ethernet MAC supports auto-negotiation and manual setting of speed and duplex mode;

>UNI interface supports 802.1x authentication, STP (Spanning Tree Protocol)/RSTP (Rapid Spanning Tree Protocol) spanning tree protocol processing;

> Provide QoS guarantee for different priority services through SLA constraint, Policing, queue management, scheduling/congestion avoidance, and discard management methods;

>Support ingress-based flow control. For services that exceed the flow, you can choose packet loss or Pause frame back pressure;

Support QoS function;

Ø WiFi features

>Technical standards: IEEE802.11b, IEEE802.11g, IEEE802.11n;

> Modulation method: 802.11b: DSSS/BPSK/QPSK/CCK

>802.11g: OFDM/DSSS/BPSK/QPSK/CCK;

>802.11n: OFDM/DSSS/BPSK/QPSK/CCK;

>Speed: 802.11b: compatible with 11,5.5,2,1 Mbps;

>802.11g: compatible with 54,48,36,24,18,12,9,6 Mbps;

>802.11n: compatible with 130,117,104,78,65,58,52,39,26,19.5,13,6.5Mbps;

>Channel: 1~11 (USA, Canada); 1~13 (Europe); 1~14 (Japan);

>Frequency range: 2.4GHz-2.4835GHz;

>Transmitting power: 11b: 17dBm +/- 1.5dBm;

>11g: 14dBm +/- 1.5dBm;

>11n: 11dBm +/- 1.5dBm;

>Receiving sensitivity: 11b: 83dBm;

>11g: 70dBm;

>11n: 64dBm;

>Coverage range: up to 100m;

>Security: 64/128-bits WEP; WPA/WPA2;

>Antenna quantity: 2*5dBi external antenna;

Ø Support agreements and standards:

>ITU-T G.984.1/2/3/4, IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3z, IEEE802.1d, IEEE802.1p, IEEE802.1q, IEEE802.1x, RFC1155, RFC1157 , RFC1112, RFC1113, etc.

Port characteristics:

l 1 PON port

l 4 10/100/1000M Ethernet ports (optional POE function)

l 1 POTS voice port

l 1 way 2.4G WIFI interface

Other features:

Certification: Comply with CE, FCC, ROHS and other standards

 EMC / EMI: Comply with VCCI Class B, FCC Part 15 B standards

Safety: Comply with UL 60950 safety regulations

Anti-lightning and anti-surge voltage protection: in line with ITU-T K.21 standard

Physical characteristics:

l Physical size: 210*135*38 (length×width×height, unit: mm)

l Power supply: 48V/1.25A

Power consumption: 8W (without POE)

l Temperature:

Working temperature: -10～55℃

Storage temperature: -30～60℃

Relative humidity: 10～90% (non-condensing)