E8008UP is a POE ONU specially designed for security with 8 100M electrical ports upstream of EPON with POE power supply function. E8008UP can directly provide users with IP data access. Based on the mature, stable and cost-effective EPON technology, it provides one PON interface and 8 10/100M adaptive electrical interfaces. Using single fiber wavelength division multiplexing technology (downstream 1490nm, upstream 1310nm), only one optical fiber is connected to the OLT, the transmission distance can reach 40 kilometers, it supports the power-off report function, and supports the local WEB management function. The 8 POE electrical ports have the function of automatically detecting and identifying PD devices that meet the IEEE 802 af/at standard and powering them, so there is no need to worry about damaging private standard PoE or non-PoE devices. It is an economical choice for small business networks that use PoE to deploy wireless access points (AP) and IP-based network surveillance cameras. It can effectively solve the problems of cumbersome maintenance, wireless coverage, terminal equipment power supply, and security monitoring engineering chief, which saves engineering costs to a limit.
Product Features
◆Comply with IEEE802.3ah-2005 and CTC EPON equipment technical requirements
◆Support symmetrical 1Gbit/s rate
◆Support 8 LLIDs, support two-way FEC, support RS (255,239) FEC codec
◆Support downstream three-fold agitation, support AES128 decryption function
◆Support synchronous Ethernet function, support SBA and DBA bandwidth allocation
◆Support Dying-Gasp detection and reporting
◆Support mainstream ONU detection
◆Two-way wire-speed forwarding of Layer 2 data services, supporting 1K MAC address table in bridge mode
◆Support 802.3, 802.1Q Tag/Untag Ethernet frame, support QinQ
◆Support flexible tag processing, compatible with CTC2.1, TR156 requirements
◆Support energy saving in line with CTC2.1 standard
◆Support L2, L3 (IPv4/6) multicast forwarding, support multiple forwarding methods, including: DMAC, DMAC +VLAN, DIP, IP+SIP, DIP+VLAN, DIP+SIP+VLAN
◆Support QOS function
◆Using single fiber wavelength division multiplexing technology (downstream 1490nm, upstream 1310nm), only one optical fiber is connected to the OLT, and the transmission distance can reach 40 kilometers
◆Easy to install and maintain, support local/remote multiple methods for management configuration and software upgrades, and cooperate with the central office OLT to realize remote fault diagnosis and location functions, greatly reducing maintenance workload
◆The 100M electrical port supports power supply through wireless access points (AP) and network surveillance cameras through Category 5 Ethernet cables
◆PoE power supply port supports IEEE802.3af/at standard PD equipment
◆Ultra-long-distance data transmission and power supply, with a distance of up to 100 meters, saves power lines, and can be flexibly installed for wireless AP and network monitoring equipment engineering
◆Adopt store-and-forward exchange mechanism
◆Intelligent power supply, minimum power consumption, to ensure the power demand of PD
◆With power circuit protection function, it can protect the safety of back-end equipment
◆Zero configuration characteristic power is automatically supplied to adaptive equipment
◆No fan silent design, energy saving and environmental protection
◆The machine adopts the hanging ear design, which can flexibly place the switch and the wall and other positions
◆Support loop detection
◆Support port no link power saving function
Specifications:
8 RJ45 ports with 10/100Mbps PoE function (port 1~port 8) 1 EPON uplink SC/PC optical interface | |
100Mbps full duplex, 10Mbps or 100Mbps half duplex Network interface: RJ-45 interface of 10BASE-T or 100BASE-TX Ethernet | |
IEEE 802.3az ,IEEE802.3ah,CTC2.1 | |
Switch MAC capacity: 2K; EPON MAC capacity: 1K (bridged) Bandwidth: 1.8Gbps (non-blocking) Network delay (100 to 100M bps): 20 microseconds (using 64-byte packet size) Frame filtering and transmission rate: 10M port 14,800pps, 100M port 148,800pps | |
LINK/ACT indicator, POE indicator, PON, LOS, ELAN | |
Dimensions (length x width x height): 184mm x 94mm x 27 mm Weight: 0.4Kg | |
Working humidity: 10%~90%, no condensation | |
Total power: 120W, (all PoE ports, port 1 to port 8) single port 30W Input power: 120W, 48V/2.5A; (customized power plugs used in various countries) | |