Jiangshu4 port power supply EPON POE ONU

Product Overview:

The E8031U-DRP is a POE ONU designed for security with EPON uplink and four gigabit ports with POE power supply functions. E8031u-drp can directly provide IP data access for users. Based on mature, stable and cost-effective EPON technology, IT provides a PON interface and four 10/100m adaptive electrical interfaces. Single fiber wavelength division multiplexing (downlink 1490nm, uplink 1310nm) is adopted, only one fiber is needed to connect with OLT, and the maximum transmission distance is up to 20km, which supports power outage report function and local WEB management function. The four POE ports are capable of automatically detecting and identifying and supplying power to PD equipment conforming to IEEE 802 AF/AT standard, thus there is no need to worry about damage to private standard POE or non-POE equipment. It is an economical choice for small business networks using PoE deployment wireless access points (AP) and IP-based network surveillance cameras. It can effectively solve the problems of tedious maintenance, wireless coverage, terminal equipment power, security monitoring project director, and save the project cost to the maximum extent.

Product features

• comply with IEEE802.3ah-2005 and CTC EPON equipment technical requirements

> supports a 1Gbit/s rate with upstream and downstream symmetry

> supports 8 LLID, bidirectional FEC, and FEC codec for RS(255,239)

> supports downlink 3-fold agitator and AES128 decryption

> supports synchronous Ethernet function and SBA and DBA bandwidth allocation

> supports Dying-Gasp testing and reporting

> supports mainstream ONU detection

> two-layer data service two-way line speed forwarding, bridge mode support 1K MAC address table

> supports Tag/Untag Ethernet frames of 802.3 and 802.1q, and supports QinQ

> supports flexible tag processing and is compatible with CTC2.1 and TR156 requirements

> supports energy saving in accordance with CTC2.1 standards

> supports L2, L3(ipv4/6) multicast forwarding, supporting a variety of forwarding methods, including: DMAC, DMAC +VLAN, DIP, IP+SIP, DIP+VLAN, DIP+SIP+VLAN

> supports QOS functionality

> adopts single-fiber WDM technology (downlink 1490nm, uplink 1310nm), only one fiber is needed to connect with OLT, and the transmission distance can be up to 20km

> is easy to install and maintain. It supports local/remote management configuration and software upgrade. With local OLT, it can realize remote fault diagnosis and location function, and greatly reduce the maintenance workload

> megapixels support power from wireless access points (AP) and network surveillance cameras (sur veillance cameras) over five Ethernet cables

>POE power supply port supports ieee 802.3af/at standard PD equipment

> ultra-long distance data transmission and power supply, the distance up to 100 meters, save power lines, can be flexible for wireless AP and network monitoring equipment installation process

> adopts the exchange mechanism of store-and-forward

> intelligent power supply, the lowest power consumption, to ensure the power demand of PD terminal

> has power circuit protection function, which can protect the security of back-end devices

The > zero configuration characteristic power supply is automatically supplied to the adaptive device

> fan - free silent design, energy - saving and environmental protection

> machine adopts lug design, which can flexibly place switches and walls

> supports loop detection

> supports port no link power saving function

Specification parameters: