How to connect the mobile OLT optical modem to the wireless router

The interface on the back of the OLT optical modem device generally has four network interfaces. Generally, the staff who install broadband on site will set one of the ports to output network signals, and use a network cable to connect it to the WAN port of the router. The details are as follows:

PGltZyBzcmM9Imh0dHA6Ly9wMDUuNWNlaW1nLmNvbS9jb250ZW50LzAzMzBjODY3LTcyZTYtZWExMS04ZGFhLWU0NDM0YmRmNjhkYi5wbmciIHdpZHRoPSI3MDAiIGhlaWdodD0iMjgwIiBib3JkZXI9IjAiIHZzcGFjZT0iMCIgdGl0bGU9Ik9MVCBvcHRpY2FsIG1vZGVtIGVxdWlwbWVudCwgbW9iaWxlIE9MVCBlcXVpcG1lbnQsIE9MVCBlcXVpcG1lbnQgbWFudWZhY3R1cmVycyIgYWx0PSJPTFQgb3B0aWNhbCBtb2RlbSBlcXVpcG1lbnQsIG1vYmlsZSBPTFQgZXF1aXBtZW50LCBPTFQgZXF1aXBtZW50IG1hbnVmYWN0dXJlcnMiIHN0eWxlPSJ3aWR0aDogNzAwcHg7IGhlaWdodDogMjgwcHg7Ii8+　

1. Check the network interface on the back of the router; usually there are 5 network cable interfaces in the router. Most routers have a network cable interface whose color is different from the others. This interface is called the [WAN] interface; after finding the WAN interface, the other interfaces are called [LAN1], [LAN2], [LAN3], [LAN4];

2. Then check the ports on the back of the optical modem. Generally, there are four network ports and two voice ports. Generally, the staff who install broadband on site will set up one of the ports to output network signals, and the other can be connected to broadband Used in TV set-top boxes; OLT optical modem device connects one end of the network cable to the optical modem and the other end to the WAN port of the router;

　　3. The LAN port on the OLT optical modem router is used to connect to Internet devices. You can use a network cable to connect one end to the router's LAN port, and the other end to the computer's network interface;